Coatings
Applications for cuttings taps
Steel
| Application | Coatings | |||
|---|---|---|---|---|
P.1Mild / magnetic steel |  |  |  | |
P.2Construction steel, case hardening steel | | | | |
P.3Carbon steel | | | ||
P.4Alloyed steel / tempered steel | |  | | |
P.5Alloyed steel / tempered steel | | | | |
P.6Alloyed steel / high strength steel | | | | |
P.7Ferritic stainless steel, martensitic stainless steel, precipitation hardening | |  |  | |
- Recommended
- Suitable
Stainless steel
| Application | Coatings | |||
|---|---|---|---|---|
M.1Austenitic stainless steel | | | | |
M.2Ferritic+austenitic (Duplex) | | | | |
- Recommended
- Suitable
Cast iron
| Application | Coatings | ||
|---|---|---|---|
K.1Grey cast iron | |  |  |
K.2Nodular cast iron, malleable cast iron, tempered cast iron | | | |
K.3Austempered ductile iron (ADI) | |
- Recommended
- Suitable
Non-ferrous metals
| Application | Coatings | ||
|---|---|---|---|
N.1Pure aluminium | | | |
N.10High strength magnesium alloys | | | |
N.2Aluminium wrought and die cast alloys with Si < 0,5% (long chipping) | | | |
N.3Aluminium wrought and die cast alloys with Si > 10% (medium chipping) | | | |
N.4Aluminium die cast alloys with Si > 10% (short chipping) | | | |
N.5Pure copper | | | |
N.6Copper alloys (long chipping), soft brass | | | |
N.7Copper alloys (short chipping), hard brass | | | |
N.8High strength bronze | | | |
N.9Pure magnesium, magnesium alloys | | |
- Recommended
- Suitable
Super alloys and titanium
| Application | Coatings | |
|---|---|---|
S.1Pure titanium | |  |
S.2Titanium alloys | | |
S.3Pure nickel | | |
S.4Nickel alloys | | |
- Recommended
- Suitable
Hardened materials
| Application | Coatings |
|---|---|
H.1Alloyed steel, hardness HRC 44-55 | |
H.2Alloyed steel, hardness HRC 56-63 | |
- Recommended
- Suitable
More info
If you have not found the information you are looking for, contact us, our technical department will reply as soon as possible.
Contact us