Technical Drawings
DIN 376
Articles
Scroll horizontally to view table data
| M | Ød1 | P | L1 | L2 | L3 | Ød2 | a | z |
 |
Article | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| [mm] | [mm] |
[mm] js 16 |
[mm] | [mm] |
[mm] h9 |
[mm] h12 |
[-] | [mm] | |||||
| M 4 | 4 | 0.7 | 63 | 12 | – | 2.8 | 2.1 | 3 | 3.3 | A000400222A1AA0 | |||
| M 5 | 5 | 0.8 | 70 | 14 | – | 3.5 | 2.7 | 3 | 4.2 | A000500222A1AA0 | |||
| M 6 | 6 | 1 | 80 | 16 | – | 4.5 | 3.4 | 3 | 5 | A000600222A1AA0 | |||
| M 7 | 7 | 1 | 80 | 16 | – | 5.5 | 4.3 | 3 | 6 | A000700222A1AA0 | |||
| M 8 | 8 | 1.25 | 90 | 18 | – | 6 | 4.9 | 3 | 6.8 | A000800222A1AA0 | |||
| M 9 | 9 | 1.25 | 90 | 18 | – | 7 | 5.5 | 3 | 7.8 | A000900222A1AA0 | |||
| M 10 | 10 | 1.5 | 100 | 20 | – | 7 | 5.5 | 3 | 8.5 | A001000222A1AA0 | |||
Features
Thread type
ISO Metric corse thread
Geometry
Tap with straight flutes
Type of chips
Medium to long chipping
Material
Conventional high speed steel
Chamfer
Chamfer form C: 2 - 3 threads for blind and through holes
Through Coolant
For blind holes up to 1,5 x d₁
Direction of cut
Right
Application Range
P
Steel
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| P.1 | 12-15 | + Show examples | |
| P.2 | 10-12 | + Show examples | |
| P.3 | 8-10 | + Show examples |
K
Cast iron
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| K.2 | 8-10 | + Show examples |
N
Aluminium - Aluminium alloys
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| N.1 | 12-15 | + Show examples | |
| N.2 | 10-12 | + Show examples | |
| N.3 | 10-12 | + Show examples | |
| N.5 | 10-12 | + Show examples | |
| N.6 | 8-10 | + Show examples |
Legend
- Recommended
- Suitable
Cutting parameter calculation
Cutting speed m/min
Rotational speed
0 Rpm
Torque
0 Nm
Spindle power
0 W