Technical Drawings
DIN 2184-1 ≤ 1/4"
DIN 2184-1 ≥ 5/16"
Articles
Scroll horizontally to view table data
| UNC | Ød1 | P | L1 | L2 | L3 | Ød2 | a | z |
 |
Article | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| [mm] | [TPI] |
[mm] js 16 |
[mm] | [mm] |
[mm] h9 |
[mm] h12 |
[-] | [mm] | |||||
| Nr.8 | 4.166 | 32 | 63 | 9 | 26 | 4.5 | 3.4 | 3 | 3.5 | AH08320604A1MH0 | |||
| Nr.10 | 4.826 | 24 | 70 | 11 | 28.5 | 6 | 4.9 | 3 | 3.9 | AH10240604A1MH0 | |||
| Nr.12 | 5.486 | 24 | 80 | 11.5 | 28.5 | 6 | 4.9 | 3 | 4.5 | AH12240604A1MH0 | |||
| 1/4" | 6.35 | 20 | 80 | 13 | 32 | 7 | 5.5 | 3 | 5.1 | AHA1400604A1MH0 | |||
| 5/16" | 7.938 | 18 | 90 | 14 | 0 | 6 | 4.9 | 3 | 6.6 | AHB5160604A1MH0 | |||
| 3/8" | 9.525 | 16 | 100 | 15.5 | 0 | 7 | 5.5 | 3 | 8 | AHC3800604A1MH0 | |||
| 7/16" | 11.113 | 14 | 100 | 17 | 0 | 8 | 6.2 | 3 | 9.4 | AHD7160604A1MH0 | |||
| 1/2" | 12.7 | 13 | 110 | 19 | 0 | 9 | 7 | 4 | 10.8 | AHE1200604A1MH0 | |||
| 5/8" | 15.875 | 11 | 110 | 23.5 | 0 | 12 | 9 | 4 | 13.5 | AHG5800604A1MH0 | |||
| 3/4" | 19.05 | 10 | 125 | 25 | 0 | 14 | 11 | 4 | 16.5 | AHH3400604A1MH0 | |||
Features
Thread type
Unified coarse thread UNC ASME - B1.1
Geometry
Tap with 45° right hand spiral
Type of chips
Medium to long chipping
Material
High performance powder metallurgy high speed steel
Special features
High tool life
Chamfer
Chamfer form B: 4 - 5 threads for through holes
Through Coolant
For blind holes up to 3 x d₁
Direction of cut
Right
Coating
TiH1
Application Range
P
Steel
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| P.2 | 25-35 | + Show examples | |
| P.3 | 20-30 | + Show examples | |
| P.4 | 15-25 | + Show examples | |
| P.5 | 5-15 | + Show examples | |
| P.6 | 5-8 | + Show examples | |
| P.7 | 8-10 | + Show examples |
M
Stainless - Steel
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| M.1 | 8-10 | + Show examples | |
| M.2 | 5-7 | + Show examples |
K
Cast iron
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| K.2 | 20-30 | + Show examples |
N
Aluminium - Aluminium alloys
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| N.2 | 30-40 | + Show examples | |
| N.3 | 25-35 | + Show examples | |
| N.6 | 25-35 | + Show examples |
S
Titanium - Titanium alloys
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| S.1 | 10-15 | + Show examples | |
| S.3 | 10-15 | + Show examples |
Legend
- Recommended
- Suitable
Cutting parameter calculation
Cutting speed m/min
Rotational speed
0 Rpm
Torque
0 Nm
Spindle power
0 W