Technical Drawings
DIN 2174 ≤ M10x1,25
DIN 2174 ≥ M12x1
Articles
Scroll horizontally to view table data
| MF | Ød1 | P | L1 | L2 | L3 | Ød2 | a | z |
 |
Article | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| [mm] | [mm] |
[mm] js 16 |
[mm] | [mm] |
[mm] h9 |
[mm] h12 |
[-] | [mm] | |||||
| MF 3 × 0.35 | 3 | 0.35 | 56 | 10 | 18 | 3.5 | 2.7 | 3 | 2.85 | A030350812G1AD0 | |||
| MF 4 × 0.5 | 4 | 0.5 | 63 | 12 | 21 | 4.5 | 3.4 | 4 | 3.8 | A040500812G1AD0 | |||
| MF 5 × 0.5 | 5 | 0.5 | 70 | 14 | 24.5 | 6 | 4.9 | 4 | 4.8 | A050500812G1AD0 | |||
| MF 6 × 0.75 | 6 | 0.75 | 80 | 16 | 29 | 6 | 4.9 | 5 | 5.65 | A060750812G1AD0 | |||
| MF 8 × 1 | 8 | 1 | 90 | 18 | 33 | 8 | 6.2 | 5 | 7.55 | A081000812G1AD0 | |||
| MF 10 × 1 | 10 | 1 | 90 | 18 | 34 | 10 | 8 | 6 | 9.55 | A101000812G1AD0 | |||
| MF 10 × 1.25 | 10 | 1.25 | 100 | 20 | 36 | 10 | 8 | 6 | 9.45 | A101250812G1AD0 | |||
| MF 12 × 1 | 12 | 1 | 100 | 22 | – | 9 | 7 | 6 | 11.55 | A121000812G1AD0 | |||
| MF 12 × 1.25 | 12 | 1.25 | 100 | 22 | – | 9 | 7 | 6 | 11.45 | A121250812G1AD0 | |||
| MF 12 × 1.5 | 12 | 1.5 | 100 | 22 | – | 9 | 7 | 6 | 11.3 | A121500812G1AD0 | |||
| MF 14 × 1.25 | 14 | 1.25 | 100 | 22 | – | 11 | 9 | 6 | 13.45 | A141250812G1AD0 | |||
| MF 14 × 1.5 | 14 | 1.5 | 100 | 22 | – | 11 | 9 | 6 | 13.3 | A141500812G1AD0 | |||
| MF 16 × 1.5 | 16 | 1.5 | 100 | 22 | – | 12 | 9 | 6 | 15.3 | A161500812G1AD0 | |||
| MF 18 × 1.5 | 18 | 1.5 | 110 | 22 | – | 14 | 11 | 8 | 17.3 | A181500812G1AD0 | |||
| MF 20 × 1.5 | 20 | 1.5 | 125 | 25 | – | 16 | 12 | 8 | 19.3 | A201500812G1AD0 | |||
Features
Thread type
ISO Metric fine thread
Geometry
Forming tap with oil grooves
Type of chips
Plastic deformation without chip formation
Material
Conventional high speed steel
Chamfer
Chamfer form C: 2 - 3 threads for blind and through holes
Through Coolant
For blind holes up to 2,5 x d₁
Through Coolant
For through holes up to 2,5 x d₁
Direction of cut
Right
Coating
TiN
Application Range
P
Steel
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| P.1 | 20-25 | + Show examples | |
| P.2 | 20-25 | + Show examples | |
| P.3 | 15-20 | + Show examples | |
| P.7 | 8-10 | + Show examples |
M
Stainless - Steel
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| M.1 | 8-10 | + Show examples |
N
Aluminium - Aluminium alloys
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| N.1 | 20-25 | + Show examples | |
| N.2 | 20-25 | + Show examples | |
| N.3 | 15-20 | + Show examples | |
| N.5 | 20-25 | + Show examples | |
| N.6 | 20-25 | + Show examples |
Legend
- Recommended
- Suitable
Cutting parameter calculation
Cutting speed m/min
Rotational speed
0 Rpm
Torque
0 Nm
Spindle power
0 W