Technical Drawings
DIN 371 ≤ M10
DIN 376 ≥ M12
Articles
Scroll horizontally to view table data
| M | Ød1 | P | L1 | L2 | L3 | Ød2 | a | z |
 |
Article | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| [mm] | [mm] |
[mm] js 16 |
[mm] | [mm] |
[mm] h9 |
[mm] h12 |
[-] | [mm] | |||||
| M 3 | 3 | 0.5 | 56 | 10 | 18 | 3.5 | 2.7 | 3 | 2.5 | A000300152B2DA0 | |||
| M 4 | 4 | 0.7 | 63 | 12 | 21 | 4.5 | 3.4 | 3 | 3.3 | A000400152B2DA0 | |||
| M 5 | 5 | 0.8 | 70 | 14 | 24.5 | 6 | 4.9 | 3 | 4.2 | A000500152B2DA0 | |||
| M 6 | 6 | 1 | 80 | 16 | 29 | 6 | 4.9 | 3 | 5 | A000600152B2DA0 | |||
| M 8 | 8 | 1.25 | 90 | 18 | 33 | 8 | 6.2 | 3 | 6.8 | A000800152B2DA0 | |||
| M 10 | 10 | 1.5 | 100 | 20 | 36 | 10 | 8 | 3 | 8.5 | A001000152B2DA0 | |||
| M 12 | 12 | 1.75 | 110 | 24 | – | 9 | 7 | 4 | 10.2 | A001200152B2DA0 | |||
| M 14 | 14 | 2 | 110 | 25 | – | 11 | 9 | 4 | 12 | A001400152B2DA0 | |||
| M 16 | 16 | 2 | 110 | 28 | – | 12 | 9 | 4 | 14 | A001600152B2DA0 | |||
Features
Thread type
ISO Metric corse thread
Geometry
Tap with straight flutes and spiral point
Type of chips
Medium to long chipping
Material
Conventional high speed steel
Chamfer
Chamfer form B: 4 - 5 threads for through holes
Through Coolant
For through holes up to 2,5 x d₁
Direction of cut
Right
Application Range
P
Steel
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| P.1 | 18-20 | + Show examples | |
| P.2 | 20-25 | + Show examples | |
| P.3 | 15-20 | + Show examples | |
| P.4 | 12-15 | + Show examples | |
| P.5 | 3-5 | + Show examples | |
| P.7 | 5-7 | + Show examples |
M
Stainless - Steel
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| M.1 | 5-7 | + Show examples | |
| M.2 | 2-3 | + Show examples |
K
Cast iron
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| K.2 | 15-20 | + Show examples |
N
Aluminium - Aluminium alloys
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| N.1 | 18-20 | + Show examples | |
| N.2 | 20-25 | + Show examples | |
| N.3 | 20-25 | + Show examples | |
| N.5 | 15-18 | + Show examples | |
| N.6 | 15-18 | + Show examples |
S
Titanium - Titanium alloys
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| S.1 | 8-10 | + Show examples | |
| S.3 | 8-10 | + Show examples |
Legend
- Recommended
- Suitable
Cutting parameter calculation
Cutting speed m/min
Rotational speed
0 Rpm
Torque
0 Nm
Spindle power
0 W