Technical Drawings
Vergnano
Articles
Scroll horizontally to view table data
| NPTF | Ød1 | P | L1 | L2 | L3 | Ød2 | a | z |
 |
Article | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| [mm] | [TPI] |
[mm] js 16 |
[mm] | [mm] |
[mm] h9 |
[mm] h12 |
[-] | [mm] | |||||
| 1/16" | 7.938 | 27 | 63 | 12 | – | 6 | 4.9 | 4 | 6.15 | AZ01160062H1PA0 | |||
| 1/2" | 21.336 | 14 | 80 | 23 | – | 16 | 12 | 4 | 17.8 | AZ01200062H1PA0 | |||
| 1/4" | 13.716 | 18 | 63 | 18 | – | 11 | 9 | 4 | 11 | AZ01400062H1PA0 | |||
| 1/8" | 10.287 | 27 | 63 | 12 | – | 7 | 5.5 | 4 | 8.5 | AZ01800062H1PA0 | |||
| 3/4" | 26.67 | 14 | 100 | 24 | – | 20 | 16 | 5 | 23 | AZ03400062H1PA0 | |||
| 3/8" | 17.145 | 18 | 70 | 18 | – | 12 | 9 | 4 | 14.5 | AZ03800062H1PA0 | |||
| 1" | 33.401 | 11 1/2 | 110 | 30 | – | 25 | 20 | 5 | 29 | AZ10000062H1PA0 | |||
| 1 1/2" | 48.26 | 11 1/2 | 140 | 32 | – | 36 | 29 | 6 | 43.8 | AZ11200062H1PA0 | |||
| 1 1/4" | 42.164 | 11 1/2 | 125 | 32 | – | 32 | 24 | 5 | 37.8 | AZ11400062H1PA0 | |||
| 2" | 60.325 | 11 1/2 | 160 | 34 | – | 45 | 35 | 6 | 56 | AZ20000062H1PA0 | |||
Features
Thread type
Dryseal National pipe thread, taper 1:16 - ASME/ANSI B1.20.3
Geometry
Tap with straight flutes with interrupted thread
Type of chips
Long chipping
Material
Conventional high speed steel
Chamfer
Chamfer form C: 2 - 3 threads for blind and through holes
Through Coolant
For blind holes
Direction of cut
Right
Application Range
P
Steel
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| P.1 | 12-15 | + Show examples | |
| P.2 | 10-15 | + Show examples | |
| P.3 | 10-12 | + Show examples | |
| P.4 | 8-10 | + Show examples | |
| P.5 | 3-5 | + Show examples | |
| P.7 | 2-3 | + Show examples |
M
Stainless - Steel
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| M.1 | 2-3 | + Show examples |
K
Cast iron
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| K.1 | 10-12 | + Show examples | |
| K.2 | 10-12 | + Show examples |
N
Aluminium - Aluminium alloys
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| N.2 | 12-15 | + Show examples | |
| N.3 | 10-12 | + Show examples | |
| N.4 | 10-12 | + Show examples | |
| N.6 | 6-8 | + Show examples | |
| N.7 | 10-12 | + Show examples | |
| N.8 | 2-3 | + Show examples | |
| N.9 | 6-8 | + Show examples | |
| N.10 | 2-3 | + Show examples |
Legend
- Recommended
- Suitable
Cutting parameter calculation
Cutting speed m/min
Rotational speed
0 Rpm
Torque
0 Nm
Spindle power
0 W