Technical Drawings
DIN 2174 ≤ M10x1,25
DIN 2174 ≥ M12x1,25
Articles
Scroll horizontally to view table data
| MF | Ød1 | P | L1 | L2 | L3 | Ød2 | a | z |
 |
Article | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| [mm] | [mm] |
[mm] js 16 |
[mm] | [mm] |
[mm] h6 |
[mm] h12 |
[-] | [mm] | |||||
| MF 8 × 1 | 8 | 1 | 90 | 14 | 35 | 8 | 6.2 | 5 | 7.55 | A081000819R3AV0 | |||
| MF 10 × 1.25 | 10 | 1.25 | 100 | 15 | 39 | 10 | 8 | 6 | 9.4 | A101000819R3AV0 | |||
| MF 10 × 1 | 10 | 1 | 90 | 14 | 35 | 10 | 8 | 6 | 9.55 | A101250819R3AV0 | |||
| MF 12 × 1.25 | 12 | 1.25 | 100 | 15 | – | 9 | 7 | 6 | 11.4 | A121250819R3AV0 | |||
| MF 12 × 1.5 | 12 | 1.5 | 100 | 15 | – | 9 | 7 | 6 | 11.3 | A121500819R3AV0 | |||
| MF 14 × 1.5 | 14 | 1.5 | 100 | 16 | – | 11 | 9 | 6 | 13.3 | A141500819R3AV0 | |||
| MF 16 × 1.5 | 16 | 1.5 | 100 | 16 | – | 12 | 9 | 6 | 15.3 | A161500819R3AV0 | |||
Features
Thread type
ISO Metric fine thread
Geometry
Forming tap with oil grooves
Type of chips
Plastic deformation without chip formation
Material
Solid carbide
Chamfer
Chamfer form E: 1,5 - 2 threads for blind holes
Through Coolant
For blind holes up to 2,5 x d₁
Through Coolant
For through holes up to 2,5 x d₁
Direction of cut
Right
Lubrication
Through coolant forming tap with internal axial and radial holes, for through holes
Coating
V-MAXX
Application Range
P
Steel
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| P.1 | 40-50 | + Show examples | |
| P.2 | 40-50 | + Show examples | |
| P.3 | 35-45 | + Show examples | |
| P.4 | 30-40 | + Show examples | |
| P.5 | 15-25 | + Show examples | |
| P.7 | 10-20 | + Show examples |
M
Stainless - Steel
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| M.1 | 10-20 | + Show examples |
N
Aluminium - Aluminium alloys
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| N.1 | 40-50 | + Show examples | |
| N.2 | 40-50 | + Show examples | |
| N.3 | 35-45 | + Show examples | |
| N.5 | 40-50 | + Show examples | |
| N.6 | 40-50 | + Show examples |
S
Nickel - Nickel alloys
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| S.3 | 10-20 | + Show examples | |
| S.4 | 5-15 | + Show examples |
Legend
- Recommended
- Suitable
Cutting parameter calculation
Cutting speed m/min
Rotational speed
0 Rpm
Torque
0 Nm
Spindle power
0 W