Technical Drawings
DIN 5156
Articles
Scroll horizontally to view table data
| G | Ød1 | P | L1 | L2 | L3 | Ød2 | a | z |
 |
Article | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| [mm] | [TPI] |
[mm] js 16 |
[mm] | [mm] |
[mm] h9 |
[mm] h12 |
[-] | [mm] | |||||
| 1/8" | 9.728 | 28 | 90 | 13 | – | 7 | 5.5 | 3 | 8.8 | AGA1800594A1LH0 | |||
| 1/4" | 13.157 | 19 | 100 | 16 | – | 11 | 9 | 4 | 11.8 | AGB1400594A1LH0 | |||
| 3/8" | 16.662 | 19 | 100 | 16.5 | – | 12 | 9 | 4 | 15.25 | AGC3800594A1LH0 | |||
| 1/2" | 20.955 | 14 | 125 | 20.5 | – | 16 | 12 | 4 | 19 | AGD1200594A1LH0 | |||
| 5/8" | 22.911 | 14 | 125 | 20.5 | – | 18 | 14.5 | 4 | 21 | AGE5800594A1LH0 | |||
| 3/4" | 26.441 | 14 | 140 | 21.5 | – | 20 | 16 | 5 | 24.5 | AGF3400594A1LH0 | |||
| 1" | 33.249 | 11 | 160 | 25.5 | – | 25 | 20 | 5 | 30.75 | AGH1000594A1LH0 | |||
Features
Thread type
Whitworth pipe thread - EN ISO 228
Geometry
Tap with 45° right hand spiral
Type of chips
Medium to long chipping
Material
High performance powder metallurgy high speed steel
Special features
High tool life
Special features
Back tapering
Chamfer
Chamfer form C: 2 - 3 threads for blind and through holes
Through Coolant
For blind holes up to 3 x d₁
Direction of cut
Right
Coating
TiH1
Application Range
P
Steel
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| P.2 | 25-35 | + Show examples | |
| P.3 | 20-30 | + Show examples | |
| P.4 | 15-25 | + Show examples | |
| P.5 | 5-15 | + Show examples | |
| P.6 | 5-8 | + Show examples | |
| P.7 | 8-10 | + Show examples |
M
Stainless - Steel
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| M.1 | 8-10 | + Show examples | |
| M.2 | 5-7 | + Show examples |
K
Cast iron
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| K.2 | 20-30 | + Show examples |
N
Aluminium - Aluminium alloys
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| N.2 | 30-40 | + Show examples | |
| N.3 | 25-35 | + Show examples | |
| N.6 | 25-35 | + Show examples |
S
Titanium - Titanium alloys
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| S.1 | 10-15 | + Show examples | |
| S.3 | 10-15 | + Show examples |
Legend
- Recommended
- Suitable
Cutting parameter calculation
Cutting speed m/min
Rotational speed
0 Rpm
Torque
0 Nm
Spindle power
0 W