Technical Drawings
DIN 2184-1 ≤ ø 3/8"
DIN 2184-1 ≥ ø 7/16"
Articles
Scroll horizontally to view table data
| UNF | Ød1 | P | L1 | L2 | L3 | Ød2 | a | z |
 |
Article | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| [mm] | [TPI] |
[mm] js 16 |
[mm] | [mm] |
[mm] h9 |
[mm] h12 |
[-] | [mm] | |||||
| Nr.8 | 4.166 | 36 | 63 | 7 | 22 | 4.5 | 3.4 | 5 | 3.85 | AN08369048G3MR0 | |||
| Nr.10 | 4.826 | 32 | 70 | 8 | 26 | 6 | 4.9 | 5 | 4.45 | AN10329048G3MR0 | |||
| Nr.12 | 5.486 | 28 | 80 | 9 | 30 | 6 | 4.9 | 5 | 5.1 | AN12289048G3MR0 | |||
| 1/4” | 6.35 | 28 | 80 | 9 | 32 | 7 | 5.5 | 5 | 5.95 | ANA1409048G3MR0 | |||
| 5/16” | 7.938 | 24 | 90 | 11 | 35 | 8 | 6.2 | 5 | 7.45 | ANB5169048G3MR0 | |||
| 3/8” | 9.525 | 24 | 100 | 11 | 39 | 10 | 8 | 6 | 9.05 | ANC3809048G3MR0 | |||
| 7/16” | 11.113 | 20 | 100 | 13 | 0 | 8 | 6.2 | 7 | 10.55 | AND7169048G3MR0 | |||
| 1/2” | 12.7 | 20 | 100 | 13 | 0 | 9 | 7 | 8 | 12.15 | ANE1209048G3MR0 | |||
| 5/8” | 15.875 | 18 | 100 | 14 | 0 | 12 | 9 | 8 | 15.25 | ANG5809048G3MR0 | |||
| 3/4” | 19.05 | 16 | 110 | 16 | 0 | 14 | 11 | 8 | 18.35 | ANH3409048G3MR0 | |||
Features
Thread type
Unified fine thread - UNF ASME B1.1
Geometry
Forming tap with oil grooves
Type of chips
Plastic deformation without chip formation
Material
High performance powder metallurgy high speed steel
Special features
High tool life
Chamfer
Chamfer form E: 1,5 - 2 threads for blind holes
Through Coolant
For blind holes up to 3 x d₁
Direction of cut
Right
Coating
RED-MAXX
Application Range
P
Steel
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| P.1 | 40-45 | + Show examples | |
| P.2 | 40-45 | + Show examples | |
| P.3 | 35-40 | + Show examples | |
| P.4 | 30-35 | + Show examples | |
| P.5 | 15-20 | + Show examples |
N
Aluminium - Aluminium alloys
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| N.1 | 40-45 | + Show examples | |
| N.2 | 40-45 | + Show examples | |
| N.3 | 35-40 | + Show examples | |
| N.5 | 40-45 | + Show examples | |
| N.6 | 40-45 | + Show examples |
S
Nickel - Nickel alloys
| MG | Use | Speed [m/min] | Material examples |
|---|---|---|---|
| S.3 | 10-15 | + Show examples | |
| S.4 | 5-10 | + Show examples |
Legend
- Recommended
- Suitable
Cutting parameter calculation
Cutting speed m/min
Rotational speed
0 Rpm
Torque
0 Nm
Spindle power
0 W